On the Pros of Choosing a Low-sloped Fort Lauderdale Roofing System

Most commercial and industrial buildings make use of low-sloped roofs because they combine the best elements of flat and sloped roofing systems. Essentially, this type of roofing is defined as one having the uppermost portion at a slope ratio of 2:12, which translates as having two units vertical and 12 units horizontal.

One can thus infer that from the side, the low-sloped roof looks like a trapezoid, with both vertical sides sloping for a distance before halting to a flat horizontal instead of meeting at a peak. If you want to know why it is one of the most used Fort Lauderdale roofing styles, an article from Ehow.com shares some of its advantages.

slope roof

A roof with a full slope will naturally have more surface area where air can enter and circulate, while a low slope will have significantly less. The greater the air concentration within a certain room, the more its heating and cooling will be affected. For instance, if the air that enters your roof is filled with the outside summer heat, your AC will have a more difficult time offsetting that heat with the cool air it produces.

Since low-sloped roofs have a flat uppermost portion, the most feasible material to use is rolled sheet roofing, which might take a bit more maintenance than typical shingles or tiles for the high pitched varieties. Nevertheless, it is this very flat surface that you have to thank for the improved ease with which you can do your regular roof cleaning and maintenance.

Thankfully, sloped roofing also requires much less materials than when you need to have metal sheets or asphalt shingles put up, thus making the installation much less costly in terms of labor. Likewise, this will also apply to efficient Fort Lauderdale roof repair on your low-sloped roof from contractors like A-1 Property Services. Moreover, rolled roofing takes less time to install and seal for protection.

When you’re choosing a roofing type for your building, always take into consideration its energy-efficiency and cost of repairs and maintenance. This is all the more important if you’re using it for commercial purposes; after all, who would want their building to eat up most of their business’ profit?